FAQs & Troubleshooting

To transfer the templates to the printer via network, download and install BRAdmin Professional from the [Downloads] section of this website.

The following screens may differ depending on the model.
 

1. Create the template you want to transfer with P-touch Editor, then choose [File] - [Transfer Template...] menu to register. Transfer Manager will start up.
2. In Transfer Manager, click , or choose [File] - [Save Transfer File] menu to save the registered template in .blf format.
    
3. Start BRAdmin Professional.
   Choose the printer from the list and click on the [Control] menu. Select [Load Firmware (Manual)].
   
    
4. Choose [TFTP PUT] and click [OK].
   
    
5. Enter the password and choose the .blf file which you saved in step 2, then click [OK].
   

   The default user ID and login password to manage printer settings is one of the following combinations:

   Combination	ID	Password
   1	-	-
   2	admin	access
   3	-	initpass
   4	-	The password preceded by "Pwd" and located either on the bottom of the printer or in the battery or media compartment.

    

   For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] section.