To Access the Scanner follow the steps listed below:
-
The instructions for scanning in these steps are for PaperPort™ 14SE. For other Windows applications, the steps will be similar. PaperPort™ 14SE supports both TWAIN and WIA drivers; the TWAIN driver (recommended) is used in these steps.
-
Depending on the model of your machine, Nuance™ PaperPort™ 14SE may not be included. If it is not included, you can use other software applications that support scanning.
NOTE: The screens may differ depending on your operating system and your Brother machine.
-
Load your document.
-
Start PaperPort™ 14SE.
(Windows 7/ Windows 10/ Windows 11)
Click Start or
or
(Start button) => (All Programs or All apps =>) Nuance PaperPort 14 => PaperPort.
(Windows 8)
-
On the Start screen, click
.
If
is not on the Start screen, right-click somewhere on an empty spot, and then click, All Apps from the bar.
-
Click PaperPort.
-
Click the Desktop menu, and then click Scan Settings in the Desktop ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
-
Click Select.
-
From the available Scanners list, select TWAIN: TW-Brother [model name] or TWAIN: TW-Brother [model name] LAN. If you want to use the WIA driver, select the Brother driver that has "WIA" as the prefix.
-
Select the Display scanner dialog box check box in the Scan or Get Photo panel.
-
Click Scan.
The Scanner Setup dialog box appears.
![Scanner Setup dialog Scanner Setup dialog](/g/b/img/faqend/faq00002063_003/vn/en/2512817/TWAINdriverSettings.jpg)
-
Adjust the settings in the Scanner Setup dialog box, if needed.
-
Click the Document Size drop-down list, and then select your document size.
-
Click PreScan if you want to preview your image and crop unwanted portions before scanning.
-
Click Start.
The machine starts scanning.