How do I insert/change the paper or label roll?

Pull the cover open lever in the direction shown to open the media roll compartment cover.

1 Cover open lever
Inserting or removing the paper or label roll.
1. Insert the media roll into the media roll compartment with the roll feeding from the bottom as shown.
  
  1 Print surface (faces outwards on the roll)
  
  The thermal sensitive side must be on the outside of the roll and installed as shown to print correctly.
2. Remove the roll.
Close the media roll compartment by pressing down on the center of the cover until it locks into place.

FAQs & Troubleshooting