TJ-4021TN
![]() |
FAQs & Troubleshooting |
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
After the initialization, the following factory settings will be restored:
Parameter | Default setting |
---|---|
Speed | 127 mm/sec (5 ips) (203 DPI) 76 mm/sec (3 ips) (300 DPI) |
Density | 8 |
Label Width | 101.5 mm (4") |
Label Height | 101.5 mm (4") |
Sensor Type | Gap sensor: TJ-4020TN, TJ-4021TN, TJ-4120TN, TJ-4121TN Black sensor: TJ-4021TNR, TJ-4121TNR |
Gap Setting | 3 mm (0.12") |
Print Direction | 0 |
Reference Point | 0,0 (upper left corner) |
Offset | 0 |
Tear Mode | On |
Peeler Mode | Off |
Cutter Mode | Off |
Rewinder Mode | Off |
Code Page | 850 |
Country Code | 001 |
Clear Flash Memory | No |