FAQs & Troubleshooting

To create labels with a 9/64" (3.5 mm) wide tape, you need to set the top and bottom margins of the tape. Otherwise the printed text may extend beyond the width of the tape because a 9/64" (3.5 mm) wide tape cassette is detected as a 1/4" (6 mm) wide tape cassette.

Follow the procedures below to set the tape margins in order to print the text correctly.

1. Insert a 9/64" (3.5 mm) wide tape into your P-touch.


2. Start P-touch Editor.


3. Make sure that the tape width is set to 1/4" (6 mm).
   If not, select 1/4" (6 mm) from the pull-down menu.
   


4. Click on the "File" on the menu bar and then select the "Printer/Page Setup…" to display the Printer Setup dialog box.
   


5. In the Printer Setup dialog box, select the "Page Setup" tab.
   Under the Margins, set the top and bottom margins to 0.07" (1.8 mm) (Recommended value).


6. Click the OK button to apply the setting.
   


7. Click  and then type in the text.