CM350H
FAQs & Troubleshooting |
I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
The settings for the blade extension and the cutting pressure indicated in the table of the Quick Reference Guide are the general guidelines. The settings will vary depending on the type and tickness of the material to be cut or the condition of the blade.
(1)Turn to the left to decrease the blade extension.
(2)Turn to the right to increase the blade extension. |
If there is too much of a blade extension, the material may not be cut cleanly and the mat will deteriorate quicker.