Innov-is XP1
FAQs & Troubleshooting |
How to Create a Pattern with Illustration Scan. [My Design Center]
Custom patterns can be created from color illustrations. You can create patterns by scanning an illustration using the included scanning frame or importing an image from USB media or SD card.
Recommended illustrations for Illustration Scan
* When you create an embroidery pattern by scanning an image with My Design Center, make sure that the scanning frame is attached to the machine. Refer to "How to attach the scanning frame".
* If you want to create an embroidery pattern by importing an image data from USB media or SD card, press , or .
When the following message appears, press OK .
>>Scanning begins.
* To stop scanning and return to the screen in step3, press .
(1) Max. Number of Colors The number of colors in an image will be reduced less than the number specified here, and then the outline will be extracted. |
|
(2) Remove Background Select whether or not the background color will be included as one of the colors. |
|
(3) Line Select whether or not the outline will be detected as a line. A thick outline can also be detected as a region. When detected as a line, the line thickness and color can be specified. |
* To enlarge the image, press .
* To display the image before being converted, press . Compare the images before and after being converted, and then change the settings if necessary.
* To return to the previous screen, press .
After the scanned image is converted to stitching, it appears as a background in the pattern drawing screen. Use gauge (1) to adjust the transparency of the background. Each press of lightens the background, making the illustration pattern darker. Each press of darkens the background, making the illustration pattern lighter. |