PR1050X
FAQs & Troubleshooting |
Aligning the embroidering position using the built-in camera
The camera built into this machine can be used to easily align the embroidering position.
This is useful for patterns which need to be embroidered in particular position as shown below.
(1) Chalk pencil mark |
When hooping the fabric in the embroidery frame, make sure that the embroidery pattern will fit within the embroidering area of the frame being used.
(1) Embroidering area (2) Embroidery pattern size (3) Chalk pencil mark |
(1) Needle drop point
|
(1) Touch to save the camera image on the external device. (2) Touch to specify the needle drop point mark on or off. (3) Each touch of this key changes the brightness of the camera image. |
(1) Use these keys to adjust the embroidering position by moving the embroidery frame. (2) Use these keys to rotate the pattern. (3) Use these keys to specify the starting position of sewing. |
The three key panels can be repositioned so that the pattern can easily be viewed. Touch the center of the top of a key panel to view possible locations where the panel can be repositioned. Touch the desired location to move the selected key panel.
The possible locations for repositioning the panel appear in gray. |
The key panel moves to the selected location. |
When using the camera to align the embroidering position on thick fabric, use the thick fabric sensor as described in "Positioning the pattern on thick fabric" on "Displaying the fabric on the LCD when aligning the embroidering position".