Innov-is NQ3700D
![]() |
FAQs & Troubleshooting |
When the thread became tangled under the bobbin winder seat
If the bobbin winding starts when the thread is not passed through the pre-tension disk correctly, the thread may become tangled beneath the bobbin winder seat.
Wind off the thread according to the following procedure.
![]() |
(1) Thread (2) Bobbin winder seat |
![]() |
(1) Screw of the bobbin winder guide post |
![]() |
(1) Bobbin-winding thread guide |
Cut the thread near the bobbin and hold the thread end of the spool with your left hand.
Unwind the thread clockwise near the bobbin winder seat with your right hand as shown below.