Innov-is NS2750D
![]() |
FAQs & Troubleshooting |
How do I attach or remove the embroidery frame ?
Select a frame that is slightly larger than the pattern size. Available frame options are displayed on the screen.
: Shows whether or not the large/extra large (multiposition) frame can be used.
: Shows whether or not the medium frame can be used.
: Shows whether or not the small frame can be used.
![]() |
(1) White : Can be used (2) Gray : Cannot be used |
If you use a frame that is too small, the presser foot may strike the frame during sewing and cause injury or may damage your machine.
Wind and insert the bobbin before attaching the embroidery frame making sure to use the recommended bobbin thread.
![]() |
(1) Lever |
![]() |
(1) Front mounting bracket (2) Front pin |
![]() |
(1) Back mounting bracket (2) Back pin |
![]() |
(1) Notch on embroidery frame (2) Bend in lever (3) Carriage (4) Embroidery frame |
Notch (1) fits firmly under the bend in the lever (2).
Notch (1) does not fit firmly under the bend in the lever (2).
![]() |
(1) Notch on embroidery frame (2) Bend in lever (3) Carriage (4) Embroidery frame |
Correctly set the embroidery frame into the embroidery frame holder. Otherwise, the presser foot may hit the embroidery frame, resulting in injury.
Raise the presser foot lever to raise the presser foot.
![]() |
(1) Lever |
![]() |
(1) Back mounting bracket (2) Back pin |
![]() |
(1) Front mounting bracket (2) Front pin |
Do not hit the needle with your finger or the embroidery frame. It may cause injury or needle breakage.