Innov-is NS2850D
![]() |
FAQs & Troubleshooting |
How do I set the bobbin ?
Install the bobbin wound with thread.
You can begin sewing immediately without pulling up the bobbin thread by simply inserting the bobbin in the bobbin case and guiding the thread through the slit in the needle plate cover.
For details on sewing after pulling up the bobbin thread, for example, when making gathers or with free motion quilting, refer to How do I pull up the bobbin thread?
![]() |
(1) Bobbin cover (2) Latch |
![]() |
(1) Tab |
Be sure to hold down the bobbin with your finger and unwind the bobbin thread correctly, otherwise the thread may break or the thread tension will be incorrect.
The order that the bobbin thread should be passed through the bobbin case is indicated by marks around the bobbin case. Be sure to thread the machine as indicated.
If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension.
![]() |
(1) Tension-adjusting spring |
You can begin sewing without pulling up the bobbin thread. If you wish to pull up the bobbin thread before starting to sew, pull up the thread according to the procedure in How do I pull up the bobbin thread?