Innov-is 900D
![]() |
FAQs & Troubleshooting |
How do I sew a blind hem?
Secure the bottoms of skirts and pants with a blind hem. Sew a blind hem according to the following procedure.
Be sure to turn off the main power before replacing the pressor foot. Otherwise, injuries may occur if Start/Stop button is accidentally pressed and the machine starts sewing.
When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not achieved.
![]() |
![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() <Thick fabric> <Normal fabric> |
|
|
|
|
|
![]() ![]() ![]() ![]() ![]() ![]() <Thick fabric> <Normal fabric> |
|
![]() |
|
![]() |
|
![]() |
![]() ![]() ![]() |
![]() |
![]() |
When you change the needle drop point, raise the needle, and then change the stitch width.
![]() |
![]() ![]() |
![]() |
<Normal fabric>
![]() |
<Normal fabric>
![]() |
|
|
|