CS-8060
FAQs & Troubleshooting |
How do I wind the bobbin?
Wind the thread around the bobbin to prepare the bobbin thread.
Raise until it stops with a click. |
Bobbin thread spool pin |
Notch Bobbin winder shaft spring |
Use the special Brother embroidery bobbin thread when embroidering.
Thread guide for bobbin winding Two slits Pretension disk |
Make sure that the thread passes under the pretension disk.
Be sure to pull the thread tightly and wind it clockwise. If the thread is wound counterclockwise, the thread may wind around the bobbin winder shaft.
Guide slit in bobbin winder seat (with built-in cutter) |
Sewing speed controller |
Start/stop button |
Do not get away from the machine while winding the bobbin. Make sure that the bobbin thread is being winded correctly. If the bobbin thread is winded incorrectly, press the Start/stop button or operate the foot controller immediately to stop the bobbin winding.
When the bobbin winding stops or becomes slow, stop the machine.
Otherwise, the sewing machine may be damaged.
If the bobbin winder shaft is set to the right side, the needle will not move. (Sewing is impossible.)