DCP-T510W
FAQs & Troubleshooting |
Press Detener/Salir (Stop/Exit) to finish the Print Quality check.
OK (DCP-T310/DCP-T510W)
Poor (DCP-T310/DCP-T510W)
OK (DCP-T710W/MFC-T810W)
Poor (DCP-T710W/MFC-T810W)
Refer to the sample below to check the print quality.
DCP-T310/DCP-T510W
Patterns | | | | |
Print Quality | None | A Few | About Half | Many |
DCP-T710W/MFC-T810W
Patterns | | | | |
Print Quality | None | A Few | About Half | Many |
After the print head nozzle is cleaned, the horizontal lines are gone.
The Print Quality check finishes.
OK
Poor
Press [Yes] to start the print quality check.
After the print head nozzle is cleaned, the horizontal lines are gone.