MFC-J5720DW
![]() |
FAQs & Troubleshooting |
No Paper Fed
There are several reasons that the Brother machine displays "No paper Fed". Try to follow each step to clear the "No Paper Fed" message.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray
Cause 2: The paper tray was not fully inserted.
Cause 3: The paper was not inserted in the center position of the manual feed slot or MP tray.
Cause 4: The Jam Clear Cover is not closed correctly.
Cause 5: Paper dust has accumulated on the surface of the paper pick-up rollers.
Cause 6: The paper is jammed in the machine.
Do one of the following:
Remove the paper tray and reinstall it until it locks into place, and then press OK on the Touchscreen.
Remove the paper and reinsert it in the center of the manual feed slot or MP tray, and then press OK on the Touchscreen.
> Click here to see how to load paper.
Make sure the Jam Clear Cover is closed evenly at both ends.
Clean the paper pick-up rollers.