MFC-8950DWT
FAQs & Troubleshooting |
Jam Rear
Please follow the steps below to clear the error message "Jam Rear".
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.
We recommend that you put the drum unit and toner cartridge assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner.
Handle the drum unit and toner cartridge assembly carefully. If toner scatters on your hands or clothes, immediately wipe or wash it off with cold water.
To prevent damage to the machine from static electricity, DO NOT touch the electrodes shown in the illustration.
After you have just used the machine, some internal parts of the machine will be extremely hot. Wait for the machine to cool down before you touch the internal parts of the machine.
Pull the green tabs at the left and right hand sides toward you and fold down the fuser cover (1).
Close the fuser cover (1).
Close the back cover.
Put the drum unit and toner cartridge assembly back into the machine.
Close the front cover of the machine.