HL-1450
FAQs & Troubleshooting |
How do I clear paper jams?
When a paper jam occurs, the printer "Ready" and "Alarm" LEDs flash as shown:
Remove the paper cassette completely from the printer.
Pull any jammed paper up and out of the printer.
Open the front cover.
Remove the drum unit assembly.
Pull any jammed paper up and out of the printer.
Do not remove the drum unit assembly with additional force at this time if you cannot remove it easily. Instead, pull the edge of the jammed paper from the paper cassette.
Do not touch the electrodes shown below, if you do, this may damage the printer.
Open the rear cover and pull the paper towards the back of the printer, the fuser may get dirty with toner powder and may result in toner scatter on the next printed page or pages. Print a few copies of the test page until the toner scatter on the printed pages clears.
Close the rear cover.
Install the drum unit assembly and close the front cover.
If you can not clear the paper jam, please contact Brother Customer Service from "Contact Us".