When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
-
DO NOT reset the drum counter unless you are replacing the drum unit.
-
If you reset the drum counter without replacing the drum unit, the machine will not be able to correctly calculate the remaining drum life.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
-
Make sure the machine is turned on.
-
Make sure the machine's cover is closed.
-
Press and hold (Toner) for about five seconds.
-
Press Drum.
-
Select the toner color for the drum unit you just replaced.
-
Press Yes.