HL-3450CN

FAQs & Troubleshooting

What kind of memory can I use?

This printer has 64 Mbytes of standard memory. The memory can be expanded up to 384 Mbytes. When you want to upgrade to more than 320 Mbytes, you need to remove the already installed 64 Mbyte DIMM and replace it with a higher capacity DIMM. (The standard installed memory can vary depending on the printer model and country.).

The installation additional memory can help the printer process the print job faster and reduce the chance of the printer running out of memory if you are printing complex graphical print jobs.

The following capacity of DIMMs can be installed:

<Europe>

Size	Manufacture	No.
16 MB	BUFFALO TECHNOLOGY	12323-0001
32 MB	BUFFALO TECHNOLOGY	12324-0001
64 MB	BUFFALO TECHNOLOGY	12325-0001
128 MB	BUFFALO TECHNOLOGY	12326-0001

<USA>

Size	Manufacture	No.
16 MB	TECHWORKS	12456-0001
32 MB	TECHWORKS	12457-0001
64 MB	TECHWORKS	12458-0001
128 MB	TECHWORKS	12459-0001

For more information, visit Techworks/Buffalo web site at http://www.techworks.com/

In general, the DIMM must have the following specifications:

Type:	100 pin and 32 bit output
CAS Latency:	2
Clock frequency:	66 MHz or more
Capacity:	16, 32, 64 MB or 128 MB
Height:	46 mm (1.8 inches) or less
Parity:	None
DRAM Type:	64M bit SDRAM 4 Bank * SDRAM can be used.

For more information, consult with the dealer where you purchased the printer.

Print | Close