Print  |  Close

PS5234

FAQs & Troubleshooting

FAQs & Troubleshooting

Preparation before threading

Thread tree

  • Raise the telescoping thread tree to its highest position.
    Make sure that the thread holders are in alignment above the spool pins as illustrated below.

    Raise the telescoping thread tree to its highest position.

    1   Thread holder on thread tree
    2   Spool pin
    3   Correct position

 

Thread spool cap

  • When using sewing thread spools, the thread spool cap should be used as illustrated below.
    Make sure that the spool notch is on the bottom.

    Thread spool cap     4   Thread spool cap

 

Thread net

  • If you are sewing with loosely spun nylon thread, we recommend that you cover the spool with the net supplied to prevent the thread from slipping off the spool.
    Adapt the net to the shape of the spool.

    Thread net

 

Before threading

  1. Turn off the main power and light switch for safety.

    Turn off the main power and light switch for safety.

  2. Raise the presser foot using presser foot lever.

    Raise the presser foot using presser foot lever.

  3. Turn the hand wheel so that the mark on the hand wheel <A> is aligned to the line <B> on the machine.

    Turn the hand wheel so that the mark on the hand wheel.

 

Print  |  Close