Innov-is XE1
FAQs & Troubleshooting |
How to set up the wireless network connection with the wizard on the machine
This machine supports a wireless network connection. Using this function, an embroidery pattern edited in embroidery editing software (PE-DESIGN 11) with wireless transfer functions can be transferred to the machine from a computer. In addition, embroidery patterns can be transferred from the machine to the embroidery editing software (PE-DESIGN 11). The machine and computer must be connected to the same network. For detailed procedures, refer to the manual for the application.
(1) Wireless network access point/router
(2) Computer connected to wireless network access point/router and the embroidery editing software (PE-DESIGN 11)
(3) Your machine
The wireless network connection complies with IEEE 802.11 n/g/b standards and uses the 2.4 GHz frequency.
A wireless network cannot be set up with WPA/WPA2 Enterprise.
In order to to set up the wireless network connection, we recommend the method that uses the wizard on this machine.
In order to connect your machine to a wireless network, the security information (SSID and network key) for your home network will be required. The network key may also be called a password, security key or encryption key. First, find your security information and note it.
SSID | Network Key (Password) |
---|---|
The wireless network connection cannot be set up if you do not have the security information.
Find the security information for your home network as noted below
(1) SSID (2) Network Password (Key) |
If you cannot find the security information, contact the manufacturer of the router, your network administrator or your Internet provider.
There are multiple ways to set up the wireless network connection. We recommend the method that uses the wizard on this machine.
(1) | Network SSID | The network SSIDs are appeared in the list. |
---|---|---|
(2) | Refresh | If the desired network SSID does not appear in the list, press Refresh key. |
(3) | Saved SSID | If the machine had already been connected to the home network, press "Saved SSID" key , and then select the saved SSID. |
(4) | New SSID | If the desired network SSID is not displayed, specify it as described below.
|
(1) | Text input area |
---|---|
(2) | Character keys |
(3) | Caps key |
(4) | Letters key |
(5) | Numbers key |
(6) | Symbols key |
(7) | Cursor keys (Move the cursor to the right) |
(8) | Cursor keys (Move the cursor to the left) |
(9) | Backspace key (Deletes the character at the cursor's position.) |
Strong signal | |
Medium signal | |
Weak signal | |
No signal |