Print  |  Close

Innov-is 1200

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I recall a specific embroidery pattern from the computer?


  1. Plug the USB cable connector into the corresponding USB port connectors for the computer and for the machine.
    • The USB cable can be plugged into the USB port connectors on the computer and machine whether or not they are turned on.
    Plug the USB cable connector into the 1 USB port connector for computer

    2 USB cable connector



    The "Removable Disk" icon will appear in "My Computer".


    • The connectors on the USB cable can only be inserted into a connector in one direction.
      If it is difficult to insert the connector, do not insert it with force and check the orientation of the connector.
    • For details on the position of the USB port on the computer, refer to the instruction manual for the corresponding equipment.


  2. Open "My Computer" then go to "Removable Disk".

    go to "Removable Disk"

  3. Move/copy the pattern data to "Removable Disk".

    Move/copy the pattern data to "Removable Disk".

    Pattern data in "Removable Disk" is written to the machine.


    • While data is being written, do not disconnect the USB cable.
    • Do not create folders within "Removable Disk".
      Since folders are not displayed, pattern data within folders cannot be recalled.


  4. Press computer key.

    The patterns in the computer are displayed on the selection screen.

  5. Press the key of the pattern you want to recall.

  6. Press the "SEWING" key. (Depending on the model, press recall key.)
    The sewing screen is displayed.

    The pattern recalled from the computer is only temporarily written to the machine.
    It is erased from the machine when the machine is turned off.
    If you wish to keep the pattern, store it in the machine.

Print  |  Close