CM650W
FAQs & Troubleshooting |
How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
After you have registered your machine with CanvasWorkspace they will be able to communicate via a wireless network connection to transfer data back and forth.
(1) (2) (3) (4) |
Wireless network access point/router
Computer/Tablet connected to wireless network access point/router Your machine Data saved to CanvasWorkspace server |
Page 1 | Page 2 |
If you stopped the procedure after setting up the wireless network, touch the [Register] key beside [ScanNCut Online] on page 7 of the settings screen to start again with registering your machine with CanvasWorkspace.
The same screen that appeared immediately after setting up the wireless network will be displayed.
Touch the [Next] key.
Depending on the model, the ScanNCut Online activation card may not be provided with your machine.
In that case, it must be purchased separately. For details on the included accessories, see the "Included Accessories" sheet in the box.
Type the characters (16 uppercase letters) that are revealed into the screen.
(1) Character input display
(2) Character keys (3) Backspace key (Deletes the character at the cursor’s position.) (4) Cursor keys (Move the cursor to the left or right.) |
After entering the characters, touch the [OK] key.
When the message shown below appears, touch the [Next] key.
A screen describing how to obtain the PIN code appears.
Continue with [Registering your machine with CanvasWorkspace].
Your ScanNCut machine and your CanvasWorkspace login ID will be registered together.
In the following procedures, [MACHINE] indicates operations performed from your machine, and [COMPUTER/TABLET] indicates operations performed in CanvasWorkspace .
[MACHINE]
After the following screen, describing how to obtain the PIN code, appears, leave the screen displayed, and then continue with the next [Computer/Tablet] operation.
(1) Machine number |
Do not touch the [OK] key yet.
Your machine number appearing in the screen will be used in the following step.
[COMPUTER/TABLET]
The screens in the following descriptions are those that appear when CanvasWorkspace is opened on a computer.
The screens will appear slightly different when the application is opened on a tablet.
If you use the CanvasWorkspace,click [Account Settings] on the [Help] menu.
If you use the CanvasWorkspace (Web) , click in the upper-right corner of the screen.
Click [Machine(s) Registration].
Click [Register a New Machine].
Type in your machine number, and then click the [OK] button.
Your machine number appears on your machine in the screen shown in step 2 describing how to obtain the PIN code.
>>A four-digit PIN code appears in the screen.
[MACHINE]
The following screen appears.
(1) |
CanvasWorkspace login ID linked to your machine. |
(2) |
Touch this key to link your machine with a different CanvasWorkspace login ID. Then perform the registration operation again. |
(3) |
Touch this key to delete the currently linked CanvasWorkspace login ID. |