CM350e
FAQs & Troubleshooting |
How to register Your Machine with CanvasWorkspace
When registering your machine with CanvasWorkspace, you can transfer the data from your computer to the cutting machine via a wireless network connection.
Some of the optional pattern collections may not be available unless you register the machine.
After you have registered your machine with CanvasWorkspace, they will be able to communicate via a wireless network connection to transfer data back and forth.
(1) (2) (3) (4) |
Wireless network access point/router Computer/Tablet connected to wireless network access point/router Your machine CanvasWorkspace server |
In the following procedures, [MACHINE] indicates operations performed from your machine, and [COMPUTER / TABLET] indicates operations performed in CanvasWorkspace.
[MACHINE]
Page 1 | Page 2 |
If you stopped the procedure after setting up the wireless network, touch the [Register]
key beside ScanNCut Online on page 7 of the settings screen to start again with registering your machine with CanvasWorkspace.
The same screen that appeared immediately after setting up the wireless network will be displayed.
Touch the [Next] key.
Depending on the model, the ScanNCut Online activation card may not be provided with your machine.
In that case, it must be purchased separately. For details on the included accessories, see the "Included Accessories" sheet in the box.
Type the characters (16 uppercase letters) that are revealed into the screen.
(1) Character input display
(2) Character keys (3) Backspace key (Deletes the character at the cursor’s position.) (4) Cursor keys (Move the cursor to the left or right.) |
After entering the characters, touch the [OK] key.
When the message shown below appears, touch the [Next] key.
A screen describing how to obtain the PIN code appears.
Continue with "Registering your machine with CanvasWorkspace".
Your ScanNCut machine and your CanvasWorkspace login ID will be registered together.
[MACHINE]
After the following screen, describing how to obtain the PIN code, appears, leave the screen displayed, and then continue with the next [Computer/Tablet] operation.
(1) Machine number |
Do not touch the OK key yet.
Your machine number appearing in the screen will be used in the following step.
[COMPUTER/TABLET]
If you use a mobile device, use the CanvasWorkspace (Web).
Your machine number appears on your machine in the screen shown in step 2 describing how to obtain the PIN code.
[MACHINE]
The following screen appears.
(1) |
CanvasWorkspace login ID linked to your machine. |
(2) |
Touch this key to link your machine with a different CanvasWorkspace login ID. Then perform the registration operation again. |
(3) |
Touch this key to delete the currently linked CanvasWorkspace login ID. |
This completes the registration of your machine with CanvasWorkspace.