FAQs & Troubleshooting

To skip the program at startup, or to calibrate, do the following:

1. Turn off the printer.


2. Press and hold the right Selection button, and then turn on the Power Switch.


3. Release the button when READY (Skip AUTO.BAS) appears on the screen.
   
   You can also release the button when the LED is lit in green.
   The LED color will change in the following order:
   Amber > red (5 times) > amber (5 times) > green (5 times) > green/amber (5 times) > red/amber (5 times) > green (lit)


4. The printer will start without running the AUTO.BAS program.