TJ-4520TN
FAQs & Troubleshooting |
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
You can also release the button when the LED is flashing in green (5 times).
The LED color will change in the following order:
Amber > red (5 times) > amber (5 times) > green (5 times) > green/amber (5 times) > red/amber (5 times) > green (lit)
Parameter | Default setting |
---|---|
Speed | 152.4 mm/sec (6 ips) (203 DPI) 101.4 mm/sec (4 ips) (300 DPI) 76.2 mm/sec (3 ips) (600 DPI) |
Density | 8 |
Label Width | 101.5 mm (4") |
Label Height | 101.5 mm (4") |
Sensor Type | Gap sensor |
Gap Setting | 3 mm (0.12") |
Print Direction | 0 |
Reference Point | 0,0 (upper left corner) |
Offset | 0 |
Tear Mode | On |
Peeler Mode | Off |
Cutter Mode | Off |
Rewinder Mode | Off |
Code Page | 850 |
Country Code | 001 |
Clear Flash Memory | No |