How to reset the printer settings by directly operating the printer

Printer initialization clears the printer's DRAM and restores its factory settings.

Press and hold the right Selection button, and then turn on the Power Switch.

Release the button when Factory Default appears on the screen.

You can also release the button when the LED is flashing in green (5 times).
The LED color will change in the following order:

Amber > red (5 times) > amber (5 times) > green (5 times) > green/amber (5 times) > red/amber (5 times) > green (lit)

After the initialization, the following factory settings will be restored:

Parameter	Default setting
Speed	152.4 mm/sec (6 ips) (203 DPI) 101.4 mm/sec (4 ips) (300 DPI) 76.2 mm/sec (3 ips) (600 DPI)
Density	8
Label Width	101.5 mm (4")
Label Height	101.5 mm (4")
Sensor Type	Gap sensor
Gap Setting	3 mm (0.12")
Print Direction	0
Reference Point	0,0 (upper left corner)
Offset	0
Tear Mode	On
Peeler Mode	Off
Cutter Mode	Off
Rewinder Mode	Off
Code Page	850
Country Code	001
Clear Flash Memory	No

FAQs & Troubleshooting