Innov-is XP3
FAQs & Troubleshooting |
How to attach the scanning frame. [My Design Center]
To avoid having the embroidery foot strike the frame during the scanning process and possibly causing injury, check the following: the thickness of the fabric or paper, creases or folds in the fabric or paper that may be rolled up too close to the frame.
Only one sheet of paper can be placed in the scanning frame per scan.
(1) White balance area (2) Scan area |
If you want to scan an image from a small piece of paper that can't be held with the magnets, copy that image onto a larger piece of paper, to then be placed on the scanning frame.
Unthread the machine to avoid having the thread slipping out of the needle or getting caught on the embroidery frame.
Make sure that embroidery foot and needle are fully raised. If scanning is started with the embroidery foot and needle lowered, the scanning frame may hit the machine, causing damage.