Innov-is NS2750D
![]() |
FAQs & Troubleshooting |
How do I adjust thread tension for embroidering?
When embroidering, the thread tension should be set so that the upper thread can slightly be seen on the wrong side of the fabric.
The pattern can be seen from the wrong side of the fabric.
If the thread tension is not set correctly, the pattern will not finish well. The fabric may pucker or the thread may break.
![]() |
(1) Right side (2) Wrong side |
Follow the operations described below to adjust thread tension according to the situation.
The tension of the upper thread is too tight, resulting in the bobbin thread being visible from the right side of the fabric.
![]() |
(1) Right side (2) Wrong side |
The tension of the upper thread is too loose, resulting in a loose upper thread, loose thread locks, or loops appearing on the right side of the fabric.
![]() |
(1) Right side (2) Wrong side |
When embroidering, if the overall tension of the upper thread is too tight or too loose, adjust it from the setting screen.
The selected setting will be applied to all patterns.
![]() |
: Tighten the upper thread tension. |
![]() |
: Loosen the upper thread tension. |