CM350R
Preguntas frecuentes y solución de problemas |
How to connect my machine to a wireless network using the Setup Wizard
You can use a wireless network to send data created in CanvasWorkspace to your machine as well as save data that you have edited on your machine to CanvasWorkspace.
(1) (3) (4) |
Wireless network access point/router Computer/Tablet connected to wireless network access point/router
Your machine |
The first step of the setup is to connect your machine to a wireless network.
Authentication method | Encryption method |
---|---|
WPA-Personal | TKIP |
AES | |
WPA2-Personal | AES |
Open | WEP |
None (without encryption) | |
Shared key | WEP |
The network settings screen appears.
Your machine will begin to emit the wireless network signal.
The Network Key may also be described as the Password, Security Key or Encryption Key.
Find this information and note it first.
SSID (Network Name) | |
---|---|
Network Key (Password) |
(1) | See the side of your WLAN access point/router. | |
(1) SSID (2) Network Key(Password) |
||
(2) | You should see the documentation provided with your wireless access point/router. | |
(3) | The default SSID could be the manufacturer’s name or the model name. | |
(4) | If you do not know the security information, please consult the router manufacturer, your system administrator, or internet provider. |
Any available SSIDs are searched for and displayed.
"WLAN Enable" can also be set to "ON" by touching the "Yes" key when the following message appeared in the "Setup Wizard".
The screen for entering the Network Key (Password) appears.
If the desired network SSID is not displayed, check the following and try to configure the wireless settings from step 2 again.
(1) | Make sure that the wireless access point/ router is powered on. | |
(2) |
Move your machine to an area with no items which obstruct the wireless network signal, such as metal doors or walls, or closer to the wireless access point/router. |
|
(3) | Temporarily place your machine within about 1 m (3.3 feet) from the wireless access point when you are configuring the wireless settings. | |
(4) |
Your machine supports IEEE 802.11 n/g/b standards and uses the 2.4 GHz frequency. Confirm if your WLAN access point/router supports IEEE 802.11 n/g/b and 2.4 GHz frequency. |
If the desired network SSID is still not displayed, configure the machine for a wireless network manually.
(1) (2) (3) (4) (5) (6) (7) |
Character input display
Character keys Uppercase/lowercase selection key
Space key Cursor keys (Move the cursor to the left or right.) |
The following screen appears and a connection is established.
If you have already completed the registration with CanvasWorkspace for your machine, touch the "OK" key to finish the setup.
: Strong signal | |
: Medium signal | |
: Weak signal |
After your wireless network has been set up, your machine will connect to the wireless network each time the machine is turned on. However, "WLAN Enable" in the network settings screen must remain set to "ON".