SDX85M

FAQs & Troubleshooting

Care and Maintenance (Cleaning the Holder)

Cleaning the Holder

If material cuttings, lint or dust accumulate in the holder, it may not operate correctly.
Clean the holder after every use.

Twist off the holder cap to remove it.
Using a commercially available brush, clean off cuttings, lint and dust.
Specifically clean off lint and dust around the blade. If lint and dust accumulate between the blade and holder, the blade may no longer rotate or the cutting quality may become poor. In addition, clean out any lint and dust that has accumulated in the cap.

Twist on the holder cap to attach it to the holder. Fully tighten the cap until it can no longer be turned.