SE-400
![]() |
FAQs & Troubleshooting |
![]() |
![]() |
If the presser foot is not raised, the sewing machine cannot be threaded.
![]() |
![]() |
The needle is correctly raised when the mark on the handwheel is at the top, as shown below. Check the handwheel and, if this mark is not at this position, press (Needle position button) until it is.
![]() |
![]() |
![]() |
![]() ![]() |
If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin or the needle may break.
![]() |
![]() |
![]() |
![]() ![]() ![]() ![]() |
![]() |
![]() |
If the needle is not raised, you cannot pass the thread into the thread take-up lever. Be sure to press the needle position button to raise the needle before passing the thread into the thread take-up lever.
![]() |
![]() |
![]() |
![]() |