CP2160M
FAQs & Troubleshooting |
"E7" message appears on the LCD.
This message is displayed when an erroneous operation is performed as follows.
(1) Needle mode indicator
or shows that the twin needle mode is selected.
Switch to the single needle mode, and replace the twin needle with a single needle before continuing the operation.
To change the needle mode, follow the steps below.
(1) Needle mode indicator
or shows that the single needle mode is selected.
Select a pattern that can be sewn with the twin needle.
Refer to "Stitch Chart" to learn stitches that can be sewn with a twin needle.