Innov-is NS1150E
![]() |
Preguntas frecuentes y solución de problemas |
How do I clean the race?
Stitching performance will suffer if lint and dust collects in the bobbin case, therefore, it should be cleaned regularly.
Unplug the power cord before cleaning the machine, otherwise injuries or an electric shock may occur.
For details, refer to How do I change the needle? and How do I remove or attach the Embroidery foot? .
If there is a screw in the needle plate cover
|
(1) Needle plate cover |
If there is no screw in the needle plate cover
![]() |
(1) Needle plate cover |
Grasp the bobbin case, and then pull it out.
![]() |
(1) Bobbin case |
![]() |
(1) Cleaning brush
(2) Race (3) Bobbin thread sensor |
Do not apply oil to the bobbin case.
|
(1) ![]()
(2) (3) Bobbin case |
Align the ![]() ![]() |
|
![]() |
Make sure that the indicated points are aligned before installing the bobbin case.
![]() |
(1) Needle plate cover |
Tighten the screw in the needle plate cover firmly using the disc-shaped screwdriver if the screw was removed in step 7.