Configure the boot method through the front panel of my Brother machine.
Follow the steps below to configure the boot method.
- Press Menu.
- Press the Up or Down arrow key to choose Network and press OK.
- Press the Up or Down arrow key to choose Wired LAN or WLAN and press OK.
- Press the Up or Down arrow key to choose TCP/IP and press OK.
- Press the Up or Down arrow key to choose Boot Method and press OK.
- Press the Up or Down arrow key to choose Auto, Static, RARP, BOOTP or DHCP and then press OK.
- For all selections, except Static, you will be asked to specify the number of times the machine tries to obtain an IP address - IP Boot Tries. The default is 3. Press OK.
- Press Stop/Exit.