You can select the tray your Brother machine will use for copying.
Follow the steps below to change the default tray setting:
-
Press (Settings).
-
Press the Up or Down arrow key to display General Setup.
-
Press General Setup.
-
Press the Up or Down arrow key to display Tray Setting.
-
Press Tray Setting.
-
Press the Up or Down arrow key to display Tray Use: Copy.
-
Press Tray Use: Copy
-
Press Tray #1, Tray #2, or Auto Tray Select.
Auto Tray Select allows the machine to feed paper from either Tray #1 or Tray #2 using the Paper Size and Paper Type you programmed for each tray.
-
Press (Home).
Follow the steps below to change the tray setting for the next copy job:
-
Do one of the following:
-
Place the document(s) you want to copy face down in the Automatic Document Feeder (ADF).
-
Place the document you want to copy face down on the flat scanner glass.
-
Press (Copy)
-
Use the dial pad to enter the number of copies you want to make.
-
Press Options.
-
Press the Up or Down arrow key to display Tray Select.
-
Press Tray Select.
-
Press Tray #1, Tray #2, or Auto Tray Select.
Auto Tray Select allows the machine to feed paper from either Tray #1 or Tray #2 using the Paper Size and Paper Type you programmed for each tray.
-
If you do not want to change additional copy settings, press OK.
-
Press Black Start or Color Start.