Changing the default tray use in Copy Mode
You can change the default tray your Brother machine uses for printing copies by following these steps:
- Press (Settings).
- Press All Settings.
- Press Up or Down arrow key to display General Setup.
- Press General Setup.
- Press Up or Down arrow key to display Tray Setting.
- Press Tray Setting.
- Press Tray Use: Copy.
- Press Tray #1, Tray #2 or Auto Tray Select.
- Press (Home).
Temporarily changing the tray in Copy Mode
You can change the tray your Brother machine uses for the next copy only by following these steps:
- Load your document.
- Press (Copy).
- Enter the number of copies you want.
- Press Options.
- Press Up or Down arrow key to display Tray Select.
- Press Tray #1, Tray #2 or Auto Tray Select.
- If you do not want to change additional settings, press OK.
- Press Black(Mono) or Color(Colour) Start.
Changing the tray use in Fax Mode
You can change the default tray your Brother machine uses for printing faxes by following these steps:
- Press (Settings).
- Press All Settings.
- Press Up or Down arrow key to display General Setup.
- Press General Setup.
- Press Up or Down arrow key to display Tray Setting.
- Press Tray Setting.
- Press Tray Use: Fax.
- Press Tray #1, Tray #2 or Auto Tray Select.
Auto Select will allow your machine to take paper from Tray #1 first, or from Tray #2 if:
- Tray #2 is set to a different paper size that is more suitable for the received faxes.
- Both trays are using the same paper size, but Tray #1 is not set to use plain paper.
- Press (Home).