Verify if the Brother machine has a dial tone.
To verify your Brother machine has a dial tone, follow the steps below:
-
Plug the telephone line cord into your Brother machine (labeled "LINE" for some countries), and then plug the other end directly into the wall telephone jack (socket).
-
Check for a dial tone.
-
Press (Fax).
-
Check your Brother machine has Hook or Tel or Tel(R).
-
If your Brother machine has Hook, press it, and listen for a dial tone. Verify the speaker volume is turned up.
-
If your Brother machine has Tel or Tel(R), you can check for a dial tone by connecting an external phone to the jack (socket) labeld EXT.
Or, follow the steps below:
-
Check that the speaker volume is set to LOW, NORMAL (Med) or HIGH (not OFF).
-
Press (Fax).
-
Press any key on the dial pad.
-
Press Fax Start. The machine scans from the flatbed.
-
When the message Next Page Yes/No is displayed, press NO.
-
Listen for a dial tone when the machine starts to dial.
If you do not hear a dial tone, click here to see points to be checked when your Brother machine has no dial tone.