MFC-8710DW
![]() |
FAQs & Troubleshooting |
Basis weight | 75-90 g/m2 (20-24 lb) |
Thickness | 80-110 μm |
Roughness | Higher than 20 sec. |
Stiffness | 90-150 cm3/100 |
Grain direction | Long grain paper with a neutral Ph value, and a moisture content of approx. 5% |
Volume resistivity | 10e9-10e11 ohm |
Surface resistivity | 10e9-10e12 ohm-cm |
Filler | CaCO3 (Neutral) |
Ash content | Below 23 wt% |
Brightness | HIGHER Than 80% |
Opacity | HIGHER than 85% |
For users in US/ Canada/ Latin America/ Europe region only:
We recommend the following paper types for this machine.
Paper Type |
Europe |
USA |
Plain paper |
Xerox Premier TCF 80 g/m2 |
Xerox 4200DP 20 lb |
Recycled paper | Xerox Recycled Supreme 80 g/m2 | (No specific brand recommended) |
Labels | Avery laser label L7163* | Avery laser labels white #5160 |
Envelope | Antalis River series (DL) | (No specific brand recommended) |
Do Not use the following type of paper, envelopes and labels.
Some types of paper may not perform well or may cause damage to your machine.
If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement.