SF200
![]() |
FAQs & Troubleshooting |
How do I thread my machine?
![]() |
(1) Spool pin |
![]() |
(1) Presser foot lever |
When you use the needle threader, make sure the needle holder is in the highest position, otherwise the hook may be damaged.
If the spool of thread is in the wrong place, or is set incorrectly, the thread may tangle on the spool pin and cause the needle to break.
![]() |
(1) Thread guide (back) (2) Thread guide (front) |
The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand.
![]() |
(1) Needle bar thread guide |
Pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.
![]() |
(1) 5 cm (2 inches) |