PR655/PR655C
FAQs & Troubleshooting |
How do I install the bobbin wound with thread
(1) Thread Picker
Thread picker is a device that is used to hold the thread when beginning to sew or when trimming the thread.
The thread picker can only be moved within a certain range. Do not pull it with extreme force.
(1) Latch
After removing the bobbin case, apply oil to the machine.
The race should be oiled. For details on oiling the machine, refer to "Oiling the machine".
Put a drop of oil onto the hook once a day before use.
Check that the thread winds off the bobbin clockwise as shown in the illustration. If the bobbin is installed with the thread winding off in the opposite direction, the embroidery will not be sewn correctly.
(1) Thread slit
(2) Tension-adjusting spring
(1) About 50 mm (2 inches)
(1) Tab
(2) Notch