MFC-L2700D
![]() |
常見問題&故障排除 |
I am experiencing problems sending a fax.
If you are experiencing problems sending faxes, please follow the instructions listed below:
To protect your investment against power surges and lighting, Brother strongly recommends that you connect your machine to a surge protector. In particular we suggest that you use a surge protector that is compatible with both standard AC power cords and telephone line cords. Surge protectors equipped with telephone jacks (sockets) will assist in insulating your machine from any power surge that might travel through a telephone line.
If you are unable to perform the troubleshooting steps listed below, contact your DSL provider for assistance.
Basic reduces the modem speed to 9600 bps and turns off ECM (error correction mode).
* If you are sending a single page and pressed Start, press 2 to choose the No(Send) option. The Brother machine will begin to dial.
* If sending multiple pages and you pressed Start, press 1 to choose the Yes option and lift the document cover, remove the first document and place the second page on the scanner glass. Press OK. The Brother machine starts scanning the second document. (Repeat this procedure for each additional page). When all documents have been scanned press 2 to choose the No(Send) option and the machine will begin to dial.