The cable label function allows you to create two types of cable labels.
![Cable label Cable label](/g/b/img/faqend/faqp00100279_000/as_ot/en/1169594/cable_label_00.gif)
Cable Label template 1 : ![Cable label template 1 Cable label template 1](/g/b/img/faqend/faqp00100279_000/as_ot/en/1169595/cable_label_01.gif)
Cable Label template 2 : ![Cable label template 2 Cable label template 2](/g/b/img/faqend/faqp00100279_000/as_ot/en/1169596/cable_label_02.gif)
To create a cable label, follow the steps below.
-
Press the [Cable] key (
/
).
-
Press the Cursor key (
) to select your desired template and then press the [OK] key.
-
In case of the template 1:
A message " Input Text " is displayed for approximately one second. Enter text and then press the [OK] key.
In case of the template 2:
A message " Input Text 1 " is displayed. Enter the first text and then press the [OK] key.
A message " Input Text 2 " is displayed. Enter the second text and then press the [OK] key.
[Print] is displayed.
-
Press the [OK] key.
[Copies: 1] is displayed.
-
Press the Cursor key or the number keys to specify the number of copies within the range of 1 - 9, and then press the [OK] key.
-
You cannot set label length when printing cable labels.
-
To clear all text and settings or text only, press the [Clear] key, press the Cursor key to select [Text&Format] or [Text Only], and press the [OK] key.
-
You can set the Font, Size, Style and Frame while entering texts.
-
To exit templates and return to the text input screen, do one of following:
-
Press the Escape key (
).
-
Press the Cursor key to select [Exit], and then press the [OK] key when [Print] appears.
-
To preview labels, press the Preview key (
/
) when [Print] is displayed on the LCD.
-
You cannot save labels created using templates to memory.