CM700
 |
FAQs & Troubleshooting |
The material being cut catches on the tip of the cutting blade.
Possible Causes (or Results)
Case1 : Dust or lint has accumulated in the holder.
Case2 : The blade is worn.
Case3 : The material being cut is incompatible with this machine.
Solutions
----- Case1 -----
Clean the holder.
>> For details, see “Cleaning the holder”.
----- Case2 -----
Replace the blade with a new one.
>> For details, see “Replacing the blade”.
----- Case3 -----
Replace the material with one compatible with this machine.
>> For details, see “Mat and Material Combinations”.