MFC-T810W
FAQs & Troubleshooting |
I get a TS error when trying to print on a wireless network.
If the wireless connection failed, the report will show the relevant error code to help resolve the issue.
> Click here to see how to print the WLAN Report.
Check the "Connection" column listed at the top of the WLAN report.
Your Brother machine is already connected to a wireless network.
If you still cannot print wirelessly despite the "Connection : OK" status:
Your Brother machine is not connected to a wireless network.
Learn more about your connection error by clicking the error code below:
Problem | Solution |
The wireless setting is not activated. |
Change the wireless setting to ON. If a network cable is connected to your machine, disconnect it and change the wireless setting of your machine to ON. |
Problem | Solution |
The wireless access point/router cannot be detected. |
|
Problem | Solution |
The wireless network and security setting you entered may be incorrect. |
Reconfirm the wireless network settings. If you do not know this information, ask your network administrator. |
Problem | Solution |
The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. |
Change the authentication and encryption methods of the wireless access point/router. The available authentication methods varies depending on your Brother machine. See the manual for your machine.
If your issue is not solved, the SSID or network settings you entered may be incorrect. Confirm the wireless network settings. |
Problem | Solution |
The security information (SSID/Network Key) is incorrect. |
Confirm the SSID and Network Key. |
Problem | Solution |
The wireless security information (Authentication method/Encryption method/Network Key) is incorrect. |
Confirm the wireless security information (Authentication method/Encryption method/Network Key). |
Problem | Solution |
The machine cannot detect a WLAN access point/router that has WPS enabled. |
If you want to connect with WPS, you must operate both your machine and the WLAN access point/router. Confirm the connection method for WPS on WLAN access point/router and try starting again. |
Problem | Solution |
Two or more WLAN access points that have WPS enabled are detected. |
|
How to confirm wireless security information (SSID/authentication method/encryption method/Network Key) of your WLAN access point/router:
If you do not know the SSID and wireless security settings of your WLAN access point/router or how to change the configuration, see the documentation provided with your WLAN access point/router, ask the manufacturer of your access point/router or ask your Internet provider or network administrator.
You must find out the wireless network settings of your wireless router or access point. Check and write down the current wireless network settings below:
How to find the Network Name (SSID) and Network Key (Password)