DCP-T520W
![]() |
คำถามที่พบบ่อย และการแก้ปัญหาเบื้องต้น |
No Paper / No Paper Fed / No Paper T1
There are several reasons that the Brother machine displays No Paper, No Paper Fed or No Paper T1. Check the following points to clear the No Paper, No Paper Fed or No Paper T1 message.
Cause 1: The machine is out of paper or paper is not correctly loaded in the paper tray
Cause 2: The paper was not inserted in the center position of the manual feed slot.
Cause 3: The Jam Clear Cover is not closed correctly.
Cause 4: Paper dust has accumulated on the surface of the paper pick-up rollers.
Do one of the following:
To load paper in the paper tray, see the Related FAQs at the end of the page.
Remove the paper and reinsert it in the center of the manual feed slot and then follow the machine's display instructions.
> Click here to see how to load paper in the manual feed slot.
Make sure the Jam Clear Cover is closed evenly at both ends.
Clean the paper pick-up rollers.
> Click here to see how to clean the paper pick-up rollers.