Innov-is F420
FAQs & Troubleshooting |
How do I sew with the twin needle?
If is pressed while the presser foot is raised, an error message appears. Lower the presser foot.
Pass the thread through the eye of the needle from the front.
Insert the spool pin so that it is perpendicular to the bobbin winder shaft.
(1) Bobbin winder shaft |
Swing the spool pin toward the left so that it is horizontal.
The thread should unroll from the top front of the spool.
(1)Spool cap
(2) Spool |
(1) Thread guide cover |
The needle threader cannot be used with the twin needle. If the needle threader is used with the twin needle, the machine may be damaged.
When using the twin needle, be sure to attach zigzag foot “J”. If bunched stitches occur, use presser foot “N” or attach stabilizer material.
Refer to the "Stitch Setting Chart" in the operation manual for selecting an appropriate stitch that can be sewn with the twin needle.
When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged.
When the twin needle mode cannot be turned on, the stitch you selected cannot be sewn in the twin needle.
When using the twin needle, be sure to select the twin needle setting, otherwise the needle may break or the machine may be damaged.
When changing the sewing direction, press (Needle position button) to raise the needle from the fabric, and then raise the presser foot lever and turn the fabric.
Do not try turning the fabric while the twin needle is down in the fabric, otherwise the needle may break or the machine may be damaged.