CM900
FAQs & Troubleshooting |
Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
There are 2 CanvasWorkspace applications that allow you to create and edit cutting or drawing pattern data on a Brother cutting machine.
For CanvasWorkspace, go to CanvasWorkspace.
You can download the CanvasWorkspace from the Downloads section. Click here to visit the download page.
For CanvasWorkspace (Web), go to CanvasWorkspace (Web).
If you use Tablet, go to CanvasWorkspace (Web).
A pattern can be sent to a cutting machine using the following three methods.
The USB flash drive and USB cable are sold separately.
A pattern created in CanvasWorkspace can be sent via a wireless network connection to a cutting machine, where it can be cut out.
Before sending data with this method, the following setup operations must be performed.
If the following screen appears, register your machine from Account Settings in the Help menu. For details, refer to How to register Your Machine with CanvasWorkspace.
Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
(1) USB port for computer (2) USB cable connector |
In CanvasWorkspace, create the pattern to be cut out (or drawn).
Select [Export / Transfer FCM File] from the [File] menu.
Select the file [Export FCM File] .
Save the pattern data to “Removable Disk”.
The pattern data is converted to cutting data and saved as an FCM file.
Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
A pattern can be sent to a cutting machine using the following two methods.
A pattern created in CanvasWorkspace (Web) can be sent via a wireless network connection to a cutting machine, where it can be cut out.
Before using this method, the following setup operations must be performed.
If you cannot select the Transfer icon, register your machine on CanvasWorkspace. For details, refer to How to register Your Machine with CanvasWorkspace (“ScanNCut Online” Setting).
Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).
(1) USB port for computer (2) USB cable connector |
Before cutting the material, be sure to perform test cut (trial cut). For details on trial cutting, refer to How do I perform trial cutting? (Test Cut).