Innov-is V7
FAQs & Troubleshooting |
The guideline marker is a laser; therefore, do not stare at the laser light directly. Otherwise it may cause blindness.
The sewing position will be indicated by a red guideline marker.
The position of the guideline marker can be adjusted to your desired location.
Press (Sensor function key).
The sensor functions screen appears.
The guideline marker position setting screen appears and the guideline marker flashes.
* Press CANCEL key to stop specifying a setting with the sensor pen.
The following error message appears if the area outside of the sensor pen touch range is touched.
Press Close key, and then touch within the sensor pen touch range.
Press OK key to apply the guideline marker position setting.
The setting can also be applied by a long touch of the sensor pen within the adjustment area.
If you set the needle drop position, the stitch width or stitch position after specifying the guideline marker position, the guideline marker may move while setting. The guideline marker moves back to the specified position after the needle drop position, stitch width or stitch position is set and the original screen appears.
You can change the guideline marker position using key or key which are at the right side of the guideline marker scale.