HL-2460
 |
FAQs & Troubleshooting |
What kind of memory can I use?
This printer has 16 Megabytes of standard memory and 2 slots for optional expansion memory. The memory can be expanded up to 272 Megabytes by installing commercially available dual in-line memory modules (DIMMs). (The standard memory fitted can vary depending on the printer model and country.)
The following DIMMs have specifically been tested:
| Size |
Manufacture |
No. |
| 16 MB | TECHWORKS | PM-HP 16M-BR |
| 32 MB | TECHWORKS | PM-HP 32M-BR |
| 64 MB | TECHWORKS | PM-HP 64M-BR |
| 128 MB | TECHWORKS | PM-HP 128M-BR |
For more information, visit Techworks web site at http://www.techworks.com/
In general, the DIMM that can be used with the HL-2460 must have the following specifications:
| Type: | 100 pin and 32 bit output |
| CAS Latency: | 2 or 3 |
| Clock frequency: | 66 MHz or more |
| Capacity: | 16, 32, 64 MB or 128 MB |
| Height: | 46 mm (1.8 inches) or less |
| Parity: | None |
| DRAM Type: |
SDRAM 4 Bank |
For more information, consult with the dealer where you purchased the printer.